SKU:RB-02S101 RTC时钟模块

产品概述

产品是一款低功耗，具有56字节非失性RAM的全BCD码时钟日历实时时钟模块，芯片可以提供秒，分，小时等信息，每一个月的天数能自动调整。并且有闰年补偿功能。AM/PM 标志位决定时钟工作于24小时或12小时模式，芯片有一个内置的电源感应电路，具有掉电检测和电池切换功能。当单片机断电情况下，可以通过一个电池让单片机项目时间保持记录，完善的数据记录。

规格参数

1. 产品货号：
2. 工作电压 ：+5v
3. 主控芯片：DS1307
4. 工作温度范围：0°C to +70°C
5. 接口类型：IIC 通信接口
6. 固定孔：4个 * M3
7. 产品尺寸：45mm * 25mm

接口定义

RTC时钟模块引脚定义：

• SDA：I2C 数据引脚
• SCK：I2C 时钟引脚
• +：电源(VCC)
• -：地(GND)

使用方法

硬件连接

例子程序

将下列程序上传到 Carduino 控制器中

• 点击此处 Arduino 入门教程查看程序上传方法
• 例子程序下载

将下载到的压缩文件解压到到 Arduino IDE 软件的 libraries 文件中（·····\arduino-1.7.6\libraries），启动 Arduino IDE 选择文件 -- 示例 -- RB-02S101_RTC_Module-master -- 打开 example - ds1307 例子程序，上传到 Arduino UNO 控制器中，就可以实现代码测试。操作方法下图所示：
解压过程

// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
#include <Wire.h>
#include "RTClib.h"

#if defined(ARDUINO_ARCH_SAMD)
// for Zero, output on USB Serial console, remove line below if using programming port to program the Zero!
   #define Serial SerialUSB
#endif

RTC_DS1307 rtc;

char daysOfTheWeek[7][12] = {"Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"};

void setup () {

#ifndef ESP8266
  while (!Serial); // for Leonardo/Micro/Zero
#endif

  Serial.begin(57600);
  if (! rtc.begin()) {
    Serial.println("Couldn't find RTC");
    while (1);
  }

  if (! rtc.isrunning()) {
    Serial.println("RTC is NOT running!");
    // following line sets the RTC to the date & time this sketch was compiled
    //rtc.adjust(DateTime(F(__DATE__), F(__TIME__)));
    // This line sets the RTC with an explicit date & time, for example to set
     rtc.adjust(DateTime(2016, 7, 27, 13, 0, 0));//2016年7月27，13点整
  }
}

void loop () {
    DateTime now = rtc.now();   
    Serial.print(now.year(), DEC);
    Serial.print('/');
    Serial.print(now.month(), DEC);
    Serial.print('/');
    Serial.print(now.day(), DEC);
    Serial.print(" (");
    Serial.print(daysOfTheWeek[now.dayOfTheWeek()]);
    Serial.print(") ");
    Serial.print(now.hour(), DEC);
    Serial.print(':');
    Serial.print(now.minute(), DEC);
    Serial.print(':');
    Serial.print(now.second(), DEC);
    Serial.println();
    delay(3000);
}

程序效果

扩展例程

• 硬件准备

1. Carduino UNO R3 控制器 * 1 个
2. V5.0 传感器扩展板 * 1 个
3. 四位七段数码管 * 1 个
4. RTC 时钟模块 * 1 个
5. 传感器连接线若干

• 硬件连接

• 例子程序

#include <TimerOne.h>
#include "TM1637.h"
#include <Wire.h>
#include "RTClib.h"
#define ON 1
#define OFF 0
#if defined(ARDUINO_ARCH_SAMD)
#define Serial SerialUSB
#endif

RTC_DS1307 rtc;

char daysOfTheWeek[7][12] = {"Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday"};

int8_t TimeDisp[] = {0x00,0x00,0x00,0x00};
unsigned char ClockPoint = 1;
unsigned char Update;
unsigned char minute = 0;
unsigned char hour = 12;
int stem,val;

#define CLK 5
#define DIO 4
TM1637 tm1637(CLK,DIO);

void setup()
{
  tm1637.set();
  tm1637.init();
  Timer1.initialize(500000);
  Timer1.attachInterrupt(TimingISR);
  #ifndef ESP8266
  while (!Serial); 
  #endif
  Serial.begin(57600);
  if (! rtc.begin()) {
    Serial.println("Couldn't find RTC");
    while (1);
  }
  if (! rtc.isrunning()) {
    Serial.println("RTC is NOT running!");
     rtc.adjust(DateTime(2016, 7, 27, 13, 0, 0));
  }
}
void loop()
{
  DateTime now = rtc.now();  
  if(Update == ON)
  {  
    TimeUpdate();
    tm1637.display(TimeDisp);
  }
    stem = now.hour();
    val = now.minute();
}

void TimingISR()
{
    ClockPoint = (~ClockPoint) & 0x01;
    Update = ON;
}
void TimeUpdate(void)
{
  if(ClockPoint)tm1637.point(POINT_ON);
  else tm1637.point(POINT_OFF);
  TimeDisp[0] = stem/ 10;
  TimeDisp[1] = stem % 10;
  TimeDisp[2] = val / 10;
  TimeDisp[3] = val % 10;
}

• 程序效果

数码管实时电子时钟。

产品相关推荐

产品购买地址

RTC 时钟模块

周边产品推荐

串行1602液晶显示模块
1602液晶扩展板 v2.0 Arduino LCD 1602 Keypad Shield
Arduino四位七段数码管

相关学习资料

DS1307 datasheet